Panasonic CF-F8 User Manual - Page 28
Getting Started, Useful Information, Troubleshooting, Appendix, Error Code/Message
View all Panasonic CF-F8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Troubleshooting Useful Information Getting Started Troubleshooting (Basic)/Error Code/Message Error Code/Message Follow the instructions below when an error code or message appears. If the problem persists or if the error code/message displayed is not shown here, contact your technical support office. Error Code/Message Solution Bad System CMOS System CMOS Checksum Error An error has occurred in the memory of system settings. This occurs when the memory con- tent is changed by an unexpected program operation, etc. z Start the Setup Utility and return the settings to the default values, and then change the set- tings as necessary. z If the problem persists, the internal clock battery may need to be replaced. Contact your tech- nical support office. Invalid Year. System The date and time settings are not correct. date restored to 01/01/ z Start the Setup Utility and set the correct date and time. 2008 z If the problem persists, the internal clock battery may need to be replaced. Contact your tech- nical support office. Error Hard disk access is prohibited by "Hard Disk Lock". Please enter the Setup Utility and change the values correctly to permit access. The hard disk access is prohibited. z Start the Setup Utility and select [Disabled] in [Hard Disk Lock] in the [Security] menu. Press to enter setup z Write down the error details and press F2 or Del to start the Setup Utility. Change the settings if necessary. Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key Disk error Press any key to restart The operating system is not installed in the floppy disk or the hard disk that you are going to boot from. z If using a floppy disk, change the disk to the one you can use for boot. z If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup Utility. If the hard disk is recognized, perform the reinstallation (Î Supplementary Instructions for Windows XP). If not, contact your technical support office. z If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility. Extended RAM Module Failed z The RAM module is not inserted correctly. Turn off the computer, and confirm that the RAM module conforms to the recommended module, and reinsert it. Standard RAM Failed z Contact your technical support office. FAN ERROR z The cooling fan does not work correctly. Contact your technical support office. To start the Setup Utility A Restart the computer. B Press F2 or Del while [Panasonic] boot screen is displayed. Appendix 28