Panasonic CF-H1CEKRZ6M User Manual - Page 74
Enabling/Disabling the Wireless LAN Standard IEEE802.11a 802.11a, Click, on the notification area.
![]() |
View all Panasonic CF-H1CEKRZ6M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Wireless LAN 74 Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a) 1 Click or on the notification area. 2 Click [802.11a Enabled] or [802.11a Disabled]. NOTE z In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law. z The Wireless Switch Utility icon ( or ) indicates the on/off status of wireless LAN and/or Bluetooth and/or wireless WAN, not the setting of IEEE802.11a. z If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connection will be temporarily interrupted. z You can also change the IEEE802.11a setting in [Device Manager]. A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager]. B Double-click [Network adapters] and double-click [Intel(R) WiFi Link 5100]. C Click [Advanced], and then select [Wireless Mode] in [Property]. D Remove the check mark from [Use default value] in [Value], and select the settings (e.g., [802.11a and 802.11g]). E Click [OK]. If you enable or disable 802.11a using the pop-up menu of Wireless Switch Utility, the setting in [Device Manager] will be accordingly changed as below. Settings in Device Manager [802.11a, 802.11b and 802.11g] [802.11b and 802.11g] [802.11g only] [802.11a and 802.11g] [802.11a only] [802.11b only] Settings in Wireless Switch Utility When 802.11a is enabled When 802.11a is disabled a+b+g is enabled b+g is enabled a+g is enabled g is enabled a is enabled b is enabled
![](/manual_guide/products/panasonic-cfh1cekrz6m-user-manual-5040100/74.png)