Panasonic CF-H1CEKRZ6M User Manual - Page 84
Security Menu
![]() |
View all Panasonic CF-H1CEKRZ6M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Setup Utility 84 NOTE z To boot from the following devices, make the settings as below. To boot from You need to set • USB connected device : [Legacy USB Support] to [Enabled] (Î page 82) Security Menu Boot Prompt Configuration Underlined items are the factory presets. Setup Utility Prompt • When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for Setup"*5 is not displayed on [Panasonic] boot screen. However F2, F12*6 and Del will work even if the message is not displayed. Disabled Enabled Password on Boot Disabled Enabled*7 Set Supervisor Password Enter the sub-menu. Hard Disk Lock • Can be changed only when [Set Supervisor Password] is set. Disabled Enabled User Password Protection No Protection Protected Set User Password • Can be changed only when [Set Supervisor Password] is set. XEmbedded Security (TPM) XFingerprint Security Enter the sub-menu. Enter the sub-menu. Enter the sub-menu. *5 Only when connected to CF-VEBH11AU : "Press F2 for Setup / F12 for LAN" *6 Only when connected to CF-VEBH11AU *7 You need to set the computer to the Cradle and connect an external keyboard to the Cradle, when the computer starts.
![](/manual_guide/products/panasonic-cfh1cekrz6m-user-manual-5040100/84.png)