Panasonic DC-G9M2 Operating Instructions - Page 298

Metering / Exposure / ISO Sensitivity - Exposure Compensation • In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. • When the exposure compensation value falls below or exceeds ±3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen. • The set exposure compensation value is stored even if you turn off the camera. • The standard value for standard exposure can be adjusted: ([Exposure Offset Adjust.]: 560) • You can set the exposure compensation value to be reset when the camera is turned off: ([Exposure Comp. Reset]: 562) • You can change the operation of the [ ] button: ([WB/ISO/Expo. Button]: 572) • Exposure Bracket can be set and flash output can be adjusted on the exposure compensation screen: ([Exposure Comp. Disp. Setting]: 572) • You can assign the function that matches the aperture value and shutter speed to the standard exposure to an Fn button: ([One Push AE]: 533) 298