Panasonic DC-G9M2 Operating Instructions - Page 749
Wi-Fi Function
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 749 highlights
Materials - Troubleshooting Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices. • When the remaining battery level is low, it may not be possible to connect to or maintain communication with other devices. (A message such as [Communication error] is displayed.) • If you place the camera on a metal table or shelf, the radio waves may be adversely affected. In such cases, you may not be able to establish a connection. Move the camera away from the metal surface. Wireless access point • Confirm that the connected wireless access point can be used. • Confirm the radio wave conditions of the wireless access point. - Move the camera closer to the wireless access point. - Change the location and angle of the wireless access point. • Depending on the wireless access point, the radio wave may not be displayed even though it is present. - Turn off and then on the wireless access point. - If the wireless channel of the wireless access point cannot be set automatically, manually set the channel supported by the camera. - If the wireless access point SSID is set not to broadcast, it may not be detected. Enter the SSID, and then connect. (Connecting by Manual Input: 677) • Depending on the wireless access point, connection may be automatically disconnected after specific time has passed. Reconnect the connection again. 749