Panasonic DC-G9M2 Operating Instructions - Page 699
Storing on a Recorder
![]() |
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 699 highlights
Connecting to Other Devices - Storing on a Recorder Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: • Turn on the camera and recorder. • Insert a card into card slot 1. 1 Connect the camera and recorder with the USB connection cable. (USB port: 689) 2 Press 34 to select [PC(Storage)] and then press or . 3 Operate the recorder to store the images. • If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the recorder without the [USB Mode] selection screen being displayed. ([USB Mode]: 609) • Take care not to turn off the camera while storage is in progress. • Images such as 4K videos may not be supported depending on your recorder. • Turn off the camera and disconnect the USB connection cable before removing the card from the camera. Otherwise, the recorded data may be damaged. • For the storage and playback procedures, refer to the operating instructions for the recorder. 699
![](/manual_guide/products/panasonic-dcg9m2-operating-instructions-994939a/699.png)