Panasonic DC-G9M2 Operating Instructions - Page 758
When using this lens, take care not to drop, bump, or apply undue force to it., Doing so may cause
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 758 highlights
Materials - Cautions for Use Lens • When using this lens, take care not to drop, bump, or apply undue force to it. Doing so may cause malfunction or damage to this lens and the digital camera. • Do not aim the lens at the sun or strong light sources. The concentrated light may cause fire or damage. • Do not allow strong light beams, such as laser light, to be directly exposed to this camera (lens). These can destroy the image sensor and cause the camera to malfunction. • Images may be affected by dust, dirt, and soiling (water, oil, fingerprints, etc.) on the lens surface. Before and after recording, use a blower to blow off dust and dirt from the surface of the lens, then lightly wipe with a soft dry cloth to remove soiling. • When the camera is not being used, attach the lens cap and lens rear cap to prevent dust and dirt from adhering to or entering the camera. • To protect the lens contact points (A), do not do the following. These may cause a malfunction. - Touch the lens contact points. - Soil the lens contact points. - Place the lens with its mount surface facing down. (A) • To improve the dust and splash resistant performance of the interchangeable lens (H-ES12060/H-FS12060), a lens mount rubber is used in the mount. - The lens mount rubber will leave scuff marks on the digital camera mount, but this does not impact performance. - To replace the lens mount rubber, contact Panasonic. 758