Panasonic DC-G9M2 Operating Instructions - Page 54
Time to Sleep]
![]() |
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Getting Started - Charging the Battery [Sleep Mode] [Sleep Mode(Wi-Fi)] [Auto LVF/ Monitor Off] [Power Save LVF Shooting] Sets the amount of time until the camera is put to sleep. Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi. Sets the amount of time it takes for the viewfinder/monitor to turn off. (The camera is not turned off.) Puts the camera to sleep when the recording screen is being displayed on the monitor when automatic viewfinder/monitor switching is active. [Time to Sleep] Sets the amount of time until the camera is put to sleep. Sets the screen where the camera is put to sleep. [Method of Activation] [Only Control Panel]: Puts the camera to sleep only when the control panel (Control Panel: 91) is displayed. [While Recording Standby]: Puts the camera to sleep from any screen during recording standby. • To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform one of the following operations: - Press the shutter button halfway. - Set the camera on/off switch to [OFF] and then [ON] again. • To recover from [Auto LVF/Monitor Off], press any button. 54
![](/manual_guide/products/panasonic-dcg9m2-operating-instructions-994939a/54.png)