Panasonic DC-G9M2 Operating Instructions - Page 740
Recording
![]() |
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 740 highlights
Materials - Troubleshooting Recording Recording stops before finishing. Cannot record. Cannot use some functions. • The temperature of the camera rises more readily in the following circumstances: when the ambient temperature is high, during continuous use such as when recording high-definition video or outputting via HDMI. When the temperature of the camera rises, [ ] appears blinking on the screen. If you continue to use the camera, a message indicating that the camera cannot be used is displayed on the screen and some functions, such as recording and HDMI output, will be stopped. Wait for the camera to cool down and for the message indicating that the camera can be used again. When the message indicating that it can be used again is displayed, turn the camera off then on again. * When recording with the camera mounted on a tripod, etc., you can set the temperature at which recording is stopped to a higher temperature. ([Thermal Management]: 603) Cannot record images. The shutter will not operate immediately when the shutter button is pressed. • If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until focus is achieved. ([Focus/Shutter Priority]: 564) The recorded image is whitish. • Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar. If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry cloth. For information about how to clean the image sensor (Dirt on the Image Sensor: 756) 740
![](/manual_guide/products/panasonic-dcg9m2-operating-instructions-994939a/740.png)