Panasonic DC-G9M2 Operating Instructions - Page 702
Operating the Camera from a PC
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 702 highlights
Connecting to Other Devices - Tethered Recording Operating the Camera from a PC Getting started: • Turn on the camera and PC. • Install "LUMIX Tether" on PC. 1 Connect the camera and PC with the USB connection cable. (USB port: 689) 2 Press 34 to select [PC(Tether)] and then press or . ≥[ ] is displayed on the camera's screen. 3 Use "LUMIX Tether" to operate the camera from the PC. • If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the PC without the [USB Mode] selection screen being displayed. ([USB Mode]: 609) • The Wi-Fi/Bluetooth functions are not available while there is a PC connection with [PC(Tether)]. 702
Connecting to Other Devices
–
Tethered Recording
702
Operating the Camera from a PC
Getting started:
•
Turn on the camera and PC.
•
Install “LUMIX Tether” on PC.
1
Connect the camera and PC with the USB connection
cable. (
USB port: 689
)
2
Press
34
to select [PC(Tether)] and then press
or
.
≥
[
] is displayed on the camera’s screen.
3
Use “LUMIX Tether” to operate the camera from the PC.
•
If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the camera
will be automatically connected to the PC without the [USB Mode] selection
screen being displayed. (
[USB Mode]: 609
)
•
The Wi-Fi/Bluetooth functions are not available while there is a PC connection
with [PC(Tether)].