Panasonic DC-G9M2 Operating Instructions - Page 403
Time Code Value], Reset], Manual Input], Current Time], Time Code Mode], HDMI Time Code Output]
![]() |
View all Panasonic DC-G9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
Video Settings - Time Code [Time Code Value] [Reset]: Sets to 00:00:00:00 (hour: minute: second: frame) [Manual Input]: Manually input hour, minute, second and frame. [Current Time]: Sets hour, minute and second to current time and sets frame to 00. [Time Code Mode] [DF]: Drop Frame. The camera modifies the difference between recorded time and time code. • Seconds and frames are separated by ".". (Example: 00:00:00.00) [NDF]: Non-Drop Frame. Records the time code without drop frame. • Seconds and frames are separated by ":". (Example: 00:00:00:00) • When the following functions are being used, [Time Code Mode] is fixed to [NDF]: - [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([Synchro Scan]) - 47.95p or 23.98p [Rec Quality] [HDMI Time Code Output] Time code information is added to images output via HDMI when recording with the [ ]/[S&Q] mode. • The time code can also be output via HDMI by setting the mode dial to [ ]/[S&Q] during playback. In the [Setup] ([IN/OUT]) menu, set [Output Resolution(Playback)] in [HDMI Connection] to [AUTO]. ([Output Resolution(Playback)]: 610) • The device screen may go dark depending on the connected device. 403
![](/manual_guide/products/panasonic-dcg9m2-operating-instructions-994939a/403.png)