Panasonic DMC-LZ5 Digital Still Camera-english/spanish - Page 19

Setting Date/Time (Clock Set) ∫ Initial setting The clock is not set so the following screen appears when you turn the camera on. OFF ON Preparation • Turn the camera off after finishing setting the clock. Then turn it on and check that the clock setting is correct. ∫ Changing the clock setting 1 Press [MENU/SET] to display the menu and then press 2. 2 Press 4 to select the [SETUP] menu icon [ ] and then press 1. 3 Press 34 to select [CLOCK SET] and then press 1. Set as shown previously. SETUP 1/3 BATTERY TYPE CLOCK SET MONITOR n0 AUTO REVIEW 1SEC. POWER SAVE 2MIN. SELECT EXIT MENU PLEASE SET THE CLOCK CLOCK SET MENU A: [MENU/SET] button B: Cursor buttons • The screen disappears after about 5 seconds. Turn the camera off and on again. 1 Press [MENU/SET]. 2 Press 3421 to select the date and time. CLOCK SET 00 : 00 JAN .11 . 2006 M/D/Y • When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed. • You can set the year from 2000 to 2099. The 24-hour system is used. • If the date is not set in the camera it will not be printed when you use a photo printing service, even if the store provides a date printing option for your photographs. (P73) SELECT SET EXIT MENU • 2/1: Select the desired item. • 3/4: Set the display order for the date and time. 3 Press [MENU/SET] several times to close the menu. 19 VQT0U87