Panasonic DMC-LZ5 Digital Still Camera-english/spanish - Page 54

Advanced • The optical image stabilizer function is fixed to [OFF]. • ISO sensitivity is fixed to [ISO80]. • You cannot compensate the exposure or set [AUDIO REC.] (DMC-LZ5), auto bracket, burst mode. Snow mode Press [ MENU SET ] to display the [SCENE MODE] menu and select a scene mode. (P49) This mode allows you to take a picture in locations such as skiing resorts and locations near snowy mountains. The exposure and the white balance are adjusted to make the white color of the snow stand out. 3 • If you do not want the age to be displayed, select [WITHOUT AGE] and press [MENU/SET]. 1 1 BABY1 3 WITH AGE WITHOUT AGE 9 months 10 days 10:00 DEC. 1.2006 BIRTHDAY SET. CANCEL SELECT SET MENU ∫ Birthday setting 1 Press 34 to select [BIRTHDAY SET.] and then press [MENU/SET]. 2 When the message [PLEASE SET THE BIRTHDAY OF THE BABY] appears, select items (Year/Month/Day) using 2/1 and set them using 3/4. 3 Press [MENU/SET] to finish the setting. • If you select [WITH AGE] without setting the birthday in advance, a message is displayed. Press [MENU/SET] and set the birthday in steps 2 and 3. 1 Baby mode 1/ 2 Baby mode 2 Press [ MENU SET ] to display the [SCENE MODE] menu and select a scene mode. (P49) This mode takes pictures of a baby with a healthy complexion. When the flash is used, the light from it is weaker than usual. You can set the birthdays of two babies by using [BABY1] and [BABY2]. • The baby's age can be displayed when playing back pictures. • The age can also be printed on each picture by using the software [LUMIX Simple Viewer] in the CD-ROM (supplied). (For information about printing, refer to the separate operating instructions for PC connection.) ∫ Age display setting • If you want the age to be displayed, set the birthday in advance, select [WITH AGE] and press [MENU/SET]. 54 VQT0U87 • The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 50 cm (1.64 feet) (Tele) to ¶] • After turning on the camera in [BABY1]/ [BABY2] in scene mode or switching to [BABY1]/[BABY2] from other scene modes, the age and current date and time are displayed for about 5 seconds at the bottom of the screen. • The age display style differs depending on the language setting in the recording mode. • The display style when printing may differ slightly from the display style on the screen. • The date of birth is displayed as [0 month 0 day]. • If the age is not properly displayed, check the clock and birthday settings. • If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even the camera is