Panasonic DMPBD50-MUL DMPBD50-MUL User Guide - Page 17
Enjoying High Bit rate Audio and Video of BD-Video
View all Panasonic DMPBD50-MUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Enjoying High Bit rate Audio and Video of BD-Video [BD-V] Regarding High Bit rate Audio This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, connect this unit to your amplifier/receiver supporting HDMI Ver. 1.3 using a High Speed HDMI cable (> 6) and set "Audio Priority Preset" (> 27) to "Quality". However, there are the following restrictions. ≥The clicking sound on the menu and audio with secondary video in picture-in-picture mode (> 16) cannot be output. ≥Any audio format not decoded by the connected amplifier/receiver cannot be output properly. If you want to output the audio properly, set "Audio Priority Preset" to "Secondary" or "Custom". ∫ Differences in audio output by setting The output audio type can be changed depending on the menu settings. Set "Digital Audio Output" (> 27) in accordance with your favorite audio with reference to the following table. Secondary To enjoy secondary audio Original audio Audio formats are output as: Dolby Digital Plus ; Dolby TrueHD ; DTS-HD High Resolution Audio ; PCM DTS-HD Master Audio ; ≥"BD-Video Secondary Audio" is set to "On", and "Digital Audio Output" is fixed to "PCM". ≥Data of 6 channels or more will be output in 5.1 channels. Playback Quality To enjoy high bit rate audio Select this mode if your amplifier/receiver is equipped with these decoders. Original audio Dolby Digital Plus ; Dolby TrueHD ; DTS-HD High Resolution Audio ; Audio formats are output as: Dolby Digital Plus Dolby TrueHD DTS-HD High Resolution Audio DTS-HD Master Audio ; DTS-HD Master Audio ≥"Digital Audio Output" is set to "Bitstream", and '"BD-Video Secondary Audio" is fixed to "Off". The clicking sound on the menu and audio with secondary video in picture-in-picture mode is not outputted. To set the high bit rate audio and secondary audio individually Custom "BD-Video Secondary Audio": "On" PCM Bitstream "BD-Video Secondary Audio": "Off" PCM Bitstream Maximum 5.1ch PCM Dolby Digital Maximum 7.1ch original PCM The original format [Note] Enjoying 7.1ch LPCM Connect this unit to your amplifier/receiver using an HDMI cable, and select "Quality" or "Custom" and then set "BD-Video Secondary Audio" to "Off". When the unit is connected using the DIGITAL AUDIO OUT terminal, there are restrictions for high bit rate audio. Original audio PCM Bitstream "BD-Video Secondary Audio": "BD-Video Secondary Audio": "On" "Off" Dolby Digital Plus/Dolby TrueHD (7.1ch) Down-mixed 2ch PCM Dolby Digital Dolby Digital DTS-HD High Resolution Audio/ DTS-HD Master Audio (7.1ch) Down-mixed 2ch PCM Dolby Digital DTS Digital Surround 7.1ch LPCM Down-mixed 2ch PCM Down-mixed 2ch PCM Down-mixed 2ch PCM ≥When "Secondary" is selected, the audio is output in the formats enclosed in bold frames. ≥When"Quality" is selected, the audio is output in the formats shown in the shaded area. Regarding 24p output Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 60 frames/second in accordance with the display format. These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc. NECESSARY CONNECTIONS ≥Connect to a TV supporting 1080/24p input via an HDMI cable. NECESSARY SETTINGS ≥"24p Output": "On" (> 28) RQT9184 (ENG) 17