Panasonic DMPBD50-MUL DMPBD50-MUL User Guide - Page 33
to select Remote Control Code, Press [SETUP]. - region code
View all Panasonic DMPBD50-MUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Card The capacity of the SD card decreased. MPEG-2 motion pictures and music on an SD card cannot be played. The contents of the card cannot be read. Network I can't connect to the network. While using my PC, I cannot connect to the network. ≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot, data may be written to the SD card. Erase the data by using "BD-Video Data Erase", format the card or use a new card. ≥Data that can be played from an SD card are AVCHD and JPEG data. ≥The card is not compatible or the contents on the card may be damaged. ≥Turn off and then turn on the unit again. ≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected. ≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this unit? Connect with a straight LAN cable. ≥Is the power for the modem or broadband router turned on? Turn the power on for each device. ≥Is there a mistake in the network settings? Follow any instructions you may have received from your ISP (Internet Service Provider) and make changes to the settings. ≥Are the broadband router settings correct? Read the operating instructions for the broadband router. ≥Is the broadband router and/or modem correctly connected? Check the operating instructions for each device and connect accordingly. ≥Check the "Network" and "BD-Live Internet Access" settings. ≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals connecting at the same time? Check the content of your contract. Page 16 5 5 - 9 9 - - - - 26, 28 - Other difficulties with playback Audio and video momentarily pause. BD-Video or DVD-Video is not played. Picture-in-picture is not played with BD-Video. The virtual package is not played with BD-Video. Alternative soundtrack and subtitles cannot be selected. No subtitles. ≥This occurs between playlist chapters or scenes ([AVCHD]). ≥When playing a title recorded on both layers, the unit automatically switches between layers and plays the title in the same way as a normal program. However, video and audio may momentarily cut out when the unit is switching layers. ≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is not defective. ≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting. ≥Some BD-Video can only be output with HDMI. ≥Confirm whether the disc supports picture-in-picture. ≥Confirm whether the disc supports the virtual package. ≥The inserted SD card does not have sufficient available capacity. ≥The SD card is write-protected. ≥Sub contents copied to an SD card are provided by the disc producer as a part of the BD-Video content. Even if you record images and audio onto an SD card, it cannot be played as a virtual package. ≥The languages are not recorded on the disc. ≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on some discs. Use the disc's menus to make changes. ≥Subtitles are not recorded on the disc. ≥Turn the subtitles on. Set "Subtitle" on the on-screen menu to "On". ≥When progressive output is on, closed captions cannot be displayed. - - Cover 26 - - 16 - 5 16 - 14 - 24 - The subtitles overlap closed ≥Turn off the subtitles or turn off the closed caption setting on the TV. 24 captions recorded on discs. Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. - The resume play function does ≥Memorized positions are canceled when - not work. - pressing [∫] several times. - opening the disc tray. ≥The resume play function may not work depending on the disc. - ≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work. - When other Panasonic products respond to this remote control Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together. 1 Press [SETUP]. 2 Press [3, 4] to select "Others" and press [OK]. 3 Press [3, 4] to select "Remote Control Code" and press [OK]. 4 Press [3, 4] to select the code (1, 2, or 3) and Remote Control Code Set Code 1 Set Code 2 press [OK]. Set Code 3 5 To change the code on the remote control While pressing [OK], press and hold the Press [ ] and [OK] together for more than 5 seconds on the remote. numbered button ([1], [2] or [3]) for more than NOTE When the following indicator appears on the unit's display and you are unable to operate the unit The unit's remote control code Press and hold [OK] and the indicated number button at the same time for more than 5 seconds. 5 seconds. 6 Press [OK]. Reference RQT9184 (ENG) 33