Panasonic DMR-ES46VS Dvd Recorder-english/spanish - Page 19

∫ If the clock is an hour slower or faster than the actual time Select "j1" or "i1" in "Adjust Time Zone" in the Setup menu (l 63). ∫ Restart Plug-in Auto Tuning (after relocation, for example) Signal source, RF output channel, channel caption revert to the default values when you perform the procedure below. Scheduled recording settings are also cleared. When the unit is on and stopped [1] Press and hold [CH, W] and [CH, X] on the main unit for about 5 seconds. The unit turns off. [2] Press [Í, DVD/VHS POWER] to turn the unit on. Plug-in Auto Tuning starts. ∫ Restart Set Channels Automatically [1] While stopped Press [FUNCTIONS]. No Disc FUNCTIONS No Disc Program Copy Other Functions ENTER RETURN [2] Select "Other Functions" with [3, 4] and press [ENTER]. No Disc FUNCTIONS No Disc Program Copy Other Functions ENTER RETURN Setup [3] Select "Setup" with [3, 4] and press [ENTER]. Setup Signal Source (RF IN) Antenna Channel Setup Disc Video Set Channels Automatically Channel Captions Preset Channel Captions Manual Channel Captions Audio Display [4] Select "Channel" with [3, 4] and press [2, 1]. [5] Select "Signal Source (RF IN)" with [3, 4] and press [ENTER]. Setup Signal Source (RF IN) Channel Antenna Setup Cable TV Disc [6] Select "Antenna" or "Cable TV" with [3, 4] and press [ENTER]. [7] Select "Set Channels Automatically" with [3, 4] and press [ENTER]. [8] Press [ENTER]. ≥Auto Channel Setting starts. This takes a few minutes. [9] Press [ENTER]. ∫ To cancel in the middle Press [RETURN]. ∫ To exit the screen Press [RETURN]. ∫ Adding and deleting channels Add or delete channels if necessary channels are not set or unnecessary channels are set. [1] Press the numeric buttons to select a channel. Antenna Mode (Airwaves) e.g., "5": [0] )[5] "15": [1] )[5] CableTV Mode (Cable) e.g., "5": "15": "115": [0] )[0] )[5] [0] )[1] )[5] [1] )[1] )[5] The unit's display ≥You can also use [CH, X, W] to select a channel. [2] Press [CH, ADD/DLT]. e.g., The channel is deleted. Channel 15 Deleted ∫ Set Clock Manually "Clock Settings" made here are applied to VHS as well. [1] While stopped Press [FUNCTIONS]. [2] Select "Other Functions" with [3, 4] and press [ENTER]. [3] Select "Setup" with [3, 4] and press [ENTER]. Setup Channel Setup Disc Video Audio Display TV Screen VHS Off Timer 6 Hours Remote Control Code Set Code 1 Clock Settings Quick Start On Restore Default Settings [4] Select "Setup" with [3, 4] and press [2, 1]. [5] Select "Clock Settings" with [3, 4] and press [ENTER]. [6] Select "Set Clock Manually" with [3, 4] and press [ENTER]. Set Clock Manually Month Day Year 1 / 1 / 2000 SAT Hour Minute 12 : 00 PM DST Time Zone Off EST ENTER [7] Use [2, 1] to select the item you want to change, and press [3, 4] to change the setting. ≥DST (Daylight Saving Time): On or Off If you select "On", the clock is advanced one hour starting at 2 a.m. on the first Sunday in April and ending at 2 a.m. on the last Sunday in October. ≥Time Zone (l 22) [8] Press [ENTER]. ≥The clock starts. ≥When you change the time zone, the recording times for titles recorded before the time zone adjustment also change to correspond to the new time zone. ∫ To return to the previous screen Press [RETURN]. 19 RQTV0141 STEP 2 Plug-in Auto Tuning