Panasonic DMR-ES46VS Dvd Recorder-english/spanish - Page 57
Recording from an external device, DV camcorder recording, to select DV Camcorder Rec.
UPC - 037988254330
View all Panasonic DMR-ES46VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
IN 2 S VIDEO VIDEO L /MONO AUDIO R (1) (2) (3) (4) (1) S-Video cable (not supplied) (2) Audio/Video cable (not supplied) A Yellow (VIDEO) B White (L) C Red (R) (3) DV cable (IEEE 1394 4-pin, not supplied) (4) External device (Playback equipment) Before connecting any cables, first make sure that the power for the unit and the external device are off. Then, after connecting cables, turn on both. Recording from an external device When connecting the IN2 input terminals on the front of the unit ≥You can also connect to the IN1 input terminals on the rear of the unit. Notes ≥When recording using the unit's input terminals, only the sound received at the time of recording will be recorded. As long as secondary audio that is recorded on the media in the external device is not output to the unit in play, it is not recorded. ≥If the audio output of the other equipment is monaural, connect to L/MONO. (Both left and right channels are recorded when connected through L/MONO.) ≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO terminal. Preparation DVD [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] ≥Release protection (disc l 60, cartridge l 60). [RAM] ≥Select DVD side with pressing [DRIVE SELECT]. VHS ≥Insert a video cassette with an accidental erasure prevention tab. (l 24) ≥Select VHS side with pressing [DRIVE SELECT]. [1] Press [REC MODE] to select the recording mode. (DVD l 26, VHS l 26) ≥DVD [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] - It is also possible to perform Flexible Recording (FR). (l 29) [2] While stopped Press [CH, X, W] or [INPUT SELECT] to select the input channel for the equipment you have connected. ≥Select IN1 or IN2. DVD Follow the above steps 1 to 2. [3] Start play on the external device. [4] Press [¥, REC] at the point where you want to start recording. VHS Follow the above steps 1 to 2. [3] Press [1, PLAY]. ≥Start playing the video cassette and find the recording start point. [4] Press [;, PAUSE], then press [¥, REC]. ≥Put the unit in recording standby mode. [5] Start play on the external device. [6] Press [;, PAUSE] at the point where you want to start recording. ∫ To skip unwanted parts Press [;, PAUSE] to pause recording. (Press again to restart recording.) ∫ To stop recording Press [∫, STOP]. For your reference ≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded. DV camcorder recording [RAM] [-R] [-RW‹V›] [+R] [+RW] Programs are recorded as a title while at the same time chapters are created at each break in the images and the playlist is created automatically. [RAM] Preparation ≥Turn on the main unit and DV equipment. ≥Select the type of audio recording from "Select Audio Channel for DV Input" in the Audio menu. (l 64) When recording from DV equipment (e.g., digital video camcorder), you can record audio/video recordings from DV tape only. ≥Pause play on the DV equipment at the point you want recording to start. ≥Press [REC MODE] to select the recording mode. [1] While stopped Press [FUNCTIONS]. [2] Press [3, 4] to select "Other Functions" and press [ENTER]. [3] Press [3, 4] to select "DV Camcorder Rec." and press [ENTER]. [4] Press [2, 1] to select "Rec." and press [ENTER]. When recording finishes The confirmation screen appears. Press [ENTER] to finish DV automatic recording. To stop recording Press [∫, STOP]. The confirmation screen appears. Press [ENTER]. Notes ≥Only one piece of DV equipment (e.g., digital video camcorder) can be connected to the unit via the DV IN terminal. ≥If you use video camcorders from other manufacturer's these are not guaranteed to work. ≥If the DV equipment is in a mode for operating the SD card, it is not possible to record with "DV Camcorder Rec.". ≥It is not possible to operate the unit from the connected DV equipment. ≥The DV IN terminal on this unit is for use with DV equipment only. (It cannot be connected to a computer, etc.) ≥The DV equipment name may not be shown correctly. ≥Depending on the DV equipment, the images or audio may not be input properly. ≥The date and time information on the tape in the DV equipment will not be recorded. ≥You cannot record and play simultaneously. If the DV automatic recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions for Recording from an external device (lleft). 57 RQTV0141 Transferring (Copying)