Panasonic DMREZ17K Dvd Recorder - Page 23
Recording from a DV Camcorder, at the point you want recording
View all Panasonic DMREZ17K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Recording from a DV Camcorder Connect cables while the power to both the unit and the external device is off. Front of the unit w to select "Record to DVD" and press w to select "Rec." then Advanced Features 4-pin DV Cable RAM -R -R DL -RW(V) +R +R DL +RW Preparation: • Turn on the unit. • RAM If the disc is protected, release protection (➔ 27). Insert a disc. to select the recording mode (➔ 11). Notes • If the desired audio is not recorded, select the kind of audio for "Select Audio Channel For DV Input" in the Setup menu (➔ 34). • RAM Programs are recorded as a single item; breaks in the images create chapters. • If you use video camcorders from other manufacturers, these are not guaranteed to work. • It is not possible to operate the unit from the connected DV equipment. • The DV equipment name may not be shown correctly. • Date and time information is not recorded, even if displayed on the camcorder. • The DV IN terminal is not meant to be connected to a computer. • This unit uses a 4-pin "DV IN" connector; Your DV camcorder may use a 4-pin or 6-pin external connector. Please consult your DV camcorder's manufacturer to confirm correct external connection. • You cannot record and play simultaneously. Tips When recording finishes The confirmation screen appears. Press [ENTER] to finish DV camcorder recording. To stop recording Press [■ STOP]. The confirmation screen appears. Press [ENTER]. If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions on page 22. Turn on the DV equipment and pause play on the DV equipment at the point you want recording to start. "DV camcorder connection" screen may appear. DV camcorder connection DV connection detected. Start recording ? Record to DVD SELECT ENTER Cancel RETURN When "DV camcorder connection" screen does not appear Perform steps 1-3 (➔ above) 1. With the unit stopped Press [FUNCTIONS]. 2. Press [e, r] to select "Other Functions" then press [ENTER]. 3. Press [e, r] to select "DV Camcorder Rec." then press [ENTER]. You can proceed to step 5 (➔ right). 23 RQT8850