Panasonic DMREZ17K Dvd Recorder - Page 55

Troubleshooting Guide If the Antenna Connector Doesn't Match Use one of the following connections to suit the antenna lead to the unit's RF IN terminal, and the 75 Ω coaxial cable to the antenna terminals on your TV or other equipment. Refer to the other equipment's operating instructions for more information. Type This unit Other equipment (television etc.) from the antenna A twin lead (Flat) Twin lead 300 Ω cable 300−75 Ω transformer To this unit's RF IN terminal 75−300 Ω transformer 75 Ω coaxial cable VHF or UHF Television When Other Panasonic Products Respond to this Remote Control Use this function to synchronize the codes for the remote control and the main unit when there are other Panasonic products close to your unit. With the unit stopped e, r to select "Setup", then q. e, r to select "Remote Control Code", then e, r to select the code "Set Code1", "Set Code2", or "Set Code3", then to set. While pressing and holding , press and hold the numbered button , , or corresponding to the code set in step 4 for more than 5 seconds to set. to complete. When the following indicator appears on the unit's display REC P TV - Change the code on the remote control to match the code displayed for the main unit (➔ step 5). Tips To return to the previous screen Press [RETURN]. To exit the screen Press [SETUP]. To Reset This Unit To reset the channel information and the clock settings On the main unit Press and hold both buttons for about 5 seconds. To reset the ratings level settings You can reset both parental rating (➔ 36) and DVD-Video rating (➔ 33). With the unit stopped to open the disc tray. On the main unit REC
Press and hold both buttons for about 5 seconds. To restore the unit if it freezes On the main unit Press and hold for more than 10 seconds. - The unit is off. or On the main unit Press and hold for REC more than 1 second with a pointed object. 55 RQT8850 Reference