Panasonic DMREZ17K Dvd Recorder - Page 64

Error Messages On the TV Cannot finish recording completely. Cannot play. Cannot record on the disc. Unable to format. Please check the disc. • The program was copy-protected. • The disc may be full. • There are already 99 recordings ( +R +R DL +RW 49 recordings). • You inserted an incompatible disc (discs recorded in PAL video, etc.). • The disc may be dirty or scratched. Page 53 Cannot record. Disc is full. Cannot record. The number of recordings has exceeded the maximum limit. Error has occurred. Please press ENTER. No disc. Please change the disc. Please set the clock. This is a non-recordable disc. This disc is not formatted properly. • RAM -RW(V) +RW Create space by erasing unwanted recordings. Even if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL, there is no increase in disc space. Available recording space on a DVD-RW (DVD-Video format) or +RW disc increases when the last recording is deleted (space may increase slightly when you delete other recordings). • Use a new disc. • Press [ENTER] to start the recovery process. You cannot operate the unit while it is recovering (" " (Self Check) appears on the unit's display). • You haven't inserted a disc. Correctly insert a disc that the unit can play. • The disc is upside down. If it is a single-sided disc, insert it so the label is facing up. • There may be a problem with the disc. Press [; OPEN/CLOSE] on the main unit to remove the disc to check for scratches and dirt. (The unit turns off automatically after you open the tray.) • The clock is not set when recording programs or setting scheduled recording. Set the clock. • The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, or +RW disc. • The disc may be incompatible or of poor quality. • You inserted an unformatted DVD-RAM, DVD-RW, or +RW disc. Format the disc with the unit. • The operation is prohibited by the unit or disc. 9, 24, 28 − − 52, 53 53 − 32, 47 52 53 28 − Product Service 1. Damage requiring service−The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing−Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts−When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check−After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: Refer to "Customer Services Directory" on page 67. 64 RQT8850