Panasonic DP-UB820 Owners Manual CA - Page 29
Reference, Setup menu, Select Player Settings.
View all Panasonic DP-UB820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Reference Setup menu Reference Change the unit's settings if necessary. The settings remain intact even if you switch the unit to standby. 1 Press [HOME]. 2 Select "Setup". 3 Select "Player Settings". Player Settings HDMI Video Audio 3D Language Network Resolution 4K60p Output 24p Output HDMI(VIDEO) Output Mode HDMI(AUDIO) Output Mode Dolby Vision Setting HDR10+ Setting Advanced Settings Auto Off Auto Auto Audio Only Off On Ratings System OK RETURN 4 Select an item and change the settings. To exit the screen Press [HOME]. HDMI ∫ Resolution The items supported by the connected devices are indicated on the screen as "¢". When any item without "¢" is selected, the images may be distorted. ≥ If "Auto"*1 is selected, the best suited output resolution to the connected TV is automatically selected. ∫ 4K60p Output This unit automatically chooses to output images in 4K*2 60p when connected to a 4K/60p compatible TV. ≥ This item is available only when "Resolution" is set to "Auto" and "4K". ≥ This item is not available when "HDMI(AUDIO) Output Mode" is set to "Video+Audio". ≥ To connect to a TV that supports 4K/60p (4:4:4/ 8 bit) or 4K/60p (4:2:2/12 bit), select "4K/ 60p(4:4:4)". Images will not be output correctly with an HDMI cable that does not support 18 Gbps. ≥ To connect to a TV that supports 4K/60p (4:2:0/ 8 bit), select "4K/60p(4:2:0)". ∫ 24p Output Content recorded at 24p*3, such as BD-Video films, is output at 24p when played back. ≥ When this unit is connected to TV compatible with 4K/24p and "Resolution" is set to "Auto" or "4K", images will be output in 4K/24p. ≥ When this unit is connected to a TV compatible with 1080/24p and "Resolution" is set to "Auto", "1080i" or "1080p", images will be output in 1080/24p. ≥ If images output in 24p are distorted, change the setting to "Off". ∫ HDMI(VIDEO) Output Mode Set whether or not to output audio from the HDMI VIDEO OUT terminal. ≥ When an amplifier is connected to the HDMI AUDIO OUT terminal and this menu item is set to "Auto ( Video Only / Video+Audio )", the TV may not output audio. In that case, select "Video+Audio". ∫ HDMI(AUDIO) Output Mode Set whether or not to output images from the HDMI AUDIO OUT terminal. ≥ It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT terminal when "Video+Audio" is selected. ∫ Dolby Vision Setting You can set enable/disable of the Dolby Vision function. By changing this setting to "On", you can use the Dolby Vision function under the following conditions: - A device (TV, etc.) that supports Dolby Vision is connected (> 10). - A disc that supports Dolby Vision is played back. ≥ The "Video Settings" setting is disabled while using the Dolby Vision function. (> 27) ≥ If all the conditions below are met, both Dolby Vision and HDR10+ are enabled. In that case, playback in HDR10+ format takes precedence. - The playback media or content is recorded in both Dolby Vision and HDR10+ formats. - Both Dolby Vision and HDR10+ are supported by the connected device (TV, etc.). - Both this function and "HDR10+ Setting" are set to "On". ∫ HDR10+ Setting You can set enable/disable of the HDR10+ function. By changing this setting to "On", you can use the HDR10+ function under the following conditions: - A device (TV, etc.) that supports HDR10+ is connected (> 10). - A disc that supports HDR10+ is played back. ≥ The "Optimum HDR Adjustment" setting is disabled while using the HDR10+ function. (> 27) - 29 -