Panasonic DP-UB820 Owners Manual CA - Page 38
Audio, Analog AUDIO OUT terminals
View all Panasonic DP-UB820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Audio Cannot hear the desired audio. h Check the connections and the "Digital Audio Output" settings. (> 11, 31) h When the unit is connected to an amplifier/ receiver with the 2ch AUDIO OUT/7.1ch AUDIO OUT terminals, set "Analog Audio Output". (> 31) h To output audio from a device connected with an HDMI cable, set "Audio Output" to "On" in the Setup menu. (> 30) h When connecting this unit to a TV via an HDMI VIDEO OUT and to an amplifier/ receiver via an HDMI AUDIO OUT, set "HDMI(VIDEO) Output Mode" to "Auto ( Video Only / Video+Audio )". (> 11, 29) Even when gapless playback is performed for an album or similar group of songs containing a sound source recorded at a live performance or concert (a music file containing songs that are recorded continuously), the playback is interrupted between songs. h In the following cases, playback is interrupted between songs: - When the file contains recordings that differ from one another in their settings, such as file format, sampling frequency, and channel number - When you set "Repeat Play" to "One track" or "Shuffle" to "On" during gapless playback - When files of 100 or more songs are contained in a single folder There is no sound coming out. h To output audio using OPTICAL terminal, set "OPTICAL Down Sampling" properly. (> 31) h Refer to "Connecting to an amplifier/receiver" (> 11 - 15) to check the audio output settings suited to the connections of your device. In the following cases, audio is not output from the terminals listed below: ≥HDMI VIDEO OUT terminal - When a device is connected to the HDMI AUDIO OUT terminal and "HDMI(VIDEO) Output Mode" is set to "Auto ( Video Only / Video+Audio )" (> 29) - When "Audio Output" in "Advanced Settings" is set to "Off" (> 30) - While playback is being performed with "Audio Output" in "Settings for High Clarity Sound" set to "OPTICAL Only" (> 31) - When "Analog Audio Output" is set to "7.1ch" or "2ch (Downmix)" (> 31) ≥HDMI AUDIO OUT terminal - When "Audio Output" in "Advanced Settings" is set to "Off" (> 30) - While playback is being performed with "Audio Output" in "Settings for High Clarity Sound" set to "OPTICAL Only" (> 31) - When "Analog Audio Output" is set to "7.1ch" or "2ch (Downmix)" (> 31) ≥OPTICAL terminal - When a device is connected to the HDMI AUDIO OUT terminal and "Audio Output" in "Advanced Settings" is set to "On" (> 30) - While playback is being performed with "Audio Output" in "Settings for High Clarity Sound" set to "HDMI Only" or "Analog Only" (> 31) ≥Analog AUDIO OUT terminals - While playback is being performed with "Audio Output" in "Settings for High Clarity Sound" set to "OPTICAL Only" (> 31) - When "Analog Audio Output" is set to "Off" (> 31) - 38 -