Panasonic DVD-LV50 Portable Dvd - Page 28

Changing settings Digital output ENTER Numbered buttons SETUP PLAY MODE ∫ ; TOP MENU ANGLE 1 DISPLAY SUBTITLE MENU ENTER AUDIO RETURN A.SRD CANCEL 1 2 3 4 5 6 S10 7 8 9 0 6 5 :9 CANCEL Entering a password Remote control only [DVD-V] The password screen is shown when you select levels 0 to 7. 1. Input a 4-digit password with the numbered buttons and press [ENTER]. 1. ≥If you enter a wrong number, press [CANCEL] to erase it before you press [ENTER]. 1. ≥The lock symbol appears closed to show the rating is locked. 1. ≥Do not forget your password. 2. Press [ENTER] to confirm the 4 digits. Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the screen. Follow the on-screen instructions. [DVD-V] Change these settings when you have connected digital equipment. PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz. Select "Yes" if the equipment you connect cannot process signals with a sampling frequency of 96 kHz. ≥Select "No" if you use analogue connection, irrespective of the type of equipment. No (Factory preset): Output as 96 kHz. There is no output if the disc has copy protection. Select "Yes" in this case. Yes: Converted to 48 kHz for output. Dolby Digital and DTS Digital Surround Bitstream (Factory preset for Dolby Digital): Select if the equipment can decode the signal. PCM (Factory preset for DTS Digital Surround): Select if the equipment cannot decode the signal. IMPORTANT If the equipment cannot decode the signal, the setting must be changed to PCM. If not, signals the equipment cannot process will be output, causing high levels of noise which can damage your hearing and the speakers. Advanced Operations RQT6450 28