Panasonic GPUS932CU GPUS932CU User Guide - Page 14

s How to mount lens Important: • Be sure to turn off the power of the CCU before mounting a lens. • A lens whose projection length of the lens mount section is 4 mm or less shall be used. • The recommended lens aperture ranges from F2.2 to F16. Selection of less than F2.2 of the lens aperture may result in image blurring. • When a zoom lens is used, focus adjustment method varies with the lens. For further information, refer to the operating instructions for the lens. • When the lens is removed, be sure to put the cap on the lens mount section of the camera head. C-mount: less than 4 mm {5/32"} z Remove the lens cap from the lens mount section of the camera head. x Turn a C-mount lens clockwise to engage the lens with the lens mount section. Important: • Check to see whether the surface of the optical filter is clean before mounting a lens. If the surface is dirty, use a blower brush for general camera to remove dust. Recommended lenses (as of October 2007) Manufacturer FUJINON FUJINON FUJINON FUJINON FUJINON FUJINON Model High Definition Fixed Lens High Definition Zoom Lens 3CCD Camera Lens 3CCD Camera Lens 3CCD Camera Lens 3CCD Camera Lens Model number HAF4.8DA-1 HA4x7.5DA-1 TF2.8DA-8 TF4DA-8 TF8DA-8 TF15DA-8 14