Panasonic GPUS932CU GPUS932CU User Guide - Page 9

Major Operating Controls and Their Functions s Camera head q Lens mount section C-mount lens is mounted on this section. ( page 14) w Camera cable connector This connector is used to connect the camera cable (option). (option) GP-CA932/4, GP-CA932/4E (4 m {13.1 ft.}) GP-CA932/6, GP-CA932/6E (6 m {19.7 ft.}) e Tripod socket The tripod socket hole is used when the camera head is secured to the tripod. The tripod socket can be mounted on either top or bottom of the camera head. Tripod socket hole: 1/4-20 UNC Important: • Be sure to turn off the power of the CCU before connecting or disconnecting the camera cable. • Avoid bending excessively or breaking the camera cable. • Use the specific-camera head only. q w e s Camera control unit (CCU) t yui o r DC POWER 12 3 LOW HIGH ON SCENE GAIN FREEZE MENU SEL OFF EXPAND BAR AWC D RANGE GP-US932 CAMERA !2 !0 !1 r Power switch [DC POWER] This switch toggles the power of the CCU and camera head on and off. The switch lights green while the power is turned on. t Scene file selection button [SCENE] The button selects a scene file from 1 to 3. Each scene file should be set up beforehand using the SETUP menu. ( page 20) Selection of a scene file turns on the green LED of the selected file number. y Gain selection button [GAIN] This button selects a gain from OFF, LOW, and HIGH. Selection of a gain turns on the green LED of the selected gain. No LED is turned on when the gain is set to off. Selectable gain varies depending on the setting in the SETUP menu ( page 19). When GAIN is set to "AUTO" and SENS UP is set to "OFF": The gain is always set to "HIGH". u Freeze/menu button [FREEZE (MENU)] Pressing this button: Displays the current image as a static image when "FREEZE" in the SETUP menu is set to "ON". 9