Panasonic GPUS932CU GPUS932CU User Guide - Page 27
Symptom, Cause/solution, Reference, s, Try to change the setting of DTL MODE.
View all Panasonic GPUS932CU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Symptom Blurred screen Plural edges visible "AWC OK" not displayed Black bars at right and left of image Vertically longer image No sound from monitor Cause/solution Reference pages • Is the lens aperture appropriately adjusted? Check whether the aperture is appropriately adjusted. Use lenses with recommended F number or higher and 14 3CCD-specific lenses. • Try to change the setting of "DTL MODE". 20 • Try to change the monitor cable. - • When the screen is too bright, narrow the lens aperture or set "ELC" to "ON". 14, 18 • This phenomenon depends on the specifications of the monitor. Select the wide and full screen display at the monitor side. - • This unit provides outputs on the assumption that the screen is 16:9. Select the wide screen display at the monitor side. - • The monitor is not applicable to sound output. - 27