Panasonic KV-S3065CL Scanner - Page 10

Component Identification Exit substopper Exit extension tray Exit stopper Document guide Hopper Hopper extension tray Front door release Inside the front door. Post-imprinter door (Back door) Used for attaching optional imprinter unit and ink cartridge. An imprinter unit installed here is called a post-imprinter. AC inlet Power cord Power cord shown on the figure is for 100-200 V. Fan exhaust vent USB connector Used to connect the scanner unit to the host computer. SCSI connector Used to connect the scanner unit to the host computer. 10 Exit tray Exit document guide Power indicator When the power is turned on, the green indicator lights. When an error occurs, the indicator will change to red, and light steadily or flash. STOP/START button Used to stop or start scanning a document. Power switch [ : on position ± : off position Front door Pre-imprinter door (Exit tray) Used for attaching optional imprinter unit and ink cartridge. An imprinter unit installed here is called a pre-imprinter. ADF / manual feed selector To prevent double feeding, adjust the selector to feed the scanning document properly. (Refer to page 17.) Paper path selector Used to change the scanning document's path direction (front side/back side). (Refer to page 17.)