Panasonic KV-S3065CL Scanner - Page 17

Paper Feed Settings ∫ Selecting the paper path for scanned document To select a U-turn path pass through to the front, set the paper path selector to the upper side. To select a straight path pass through to the back, set the paper path selector to the lower side. ≥ When scanning documents with a thickness of 0.2 mm to 1 mm, like folded documents, set the paper path selector to straight path. Paper path selector The paper path selector is located on the left side of the scanner. ∫ Setting the ADF / manual feed selector ¥ Single scanning When scanning a single sheet or several sheets, set the ADF / manual feed selector to "MANUAL". ¥ Continuous scanning Setting Position Status When double feeding occurs 1 frequently or scanning a document with a rough face as in NCR paper 2 (Standard setting) When scanning normal paper When scanning with smooth 3 sided paper or a paper jam occurs with normal paper 4 When a jam occurs at the paper feed component ≥ The ADF / manual feed selector must be set in the correct position for this setting to function properly. ≥ If double feed alarm beeps frequently, change the ADF / manual feed selector. 21 3 4 ADF ADJ. MANUAL ADF / manual feed selector The ADF / manual feed selector is located on the left side of the scanner. ≥ If thin paper (with paper weight less than 50 g/m2) causes a paper jam frequently at the paper feed component, the optional roller exchange kit for thin paper (KV-SS018) should be used. 17