Panasonic KV-S3065CL Scanner - Page 24
Warning, Use the roller cleaning paper, KV-SS03 to remove the dirt from the, surfaces of all rollers.
UPC - 092281842226
View all Panasonic KV-S3065CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Cleaning the Unit 3 Use the roller cleaning paper (KV-SS03) to remove the dirt from the surfaces of all rollers. ≥ When wiping off the dirt, hold the rollers to prevent them from rotating. Wipe the rollers all the way around from one end to the other in the directions of the arrows shown on the diagram to the right. ≥ Perform the retard roller cleaning only in the left direction. If cleaned in the right direction, the roller may slip out of the proper position. ≥ When cleaning the rollers in the back of the bottom image sensor cover (rollers of part A), do not touch the tip of the plastic pointer (black) in the back of the unit. Set the paper path selector as shown below. For roller cleaning, pull the belt in the direction of the arrow to rotate the rollers. Paper feed roller Image sensor covers Drive rollers A Separation roller Free rollers Free rollers Free rollers Paper path selector Pointer Drive rollers Belt The paper path selector is located on the left side of the scanner. Conveyor rollers Warning: When the tip of the pointer is raised, the tip may cause an injury. Retard rollers Drive rollers Free rollers Paper path selector Pointer ≥ The image sensor covers may be very hot after scanning a lot of documents. Never touch the image sensor covers or surroundings directly. Left side view ≥ Wipe in the direction of the arrows. Other rollers Retard rollers 24