Panasonic KX-HNS101 Operating Instructions CA - Page 16

Appendix Testing the window/ door sensor You can check the window/door sensor's LED indicator and test the performance of the window/door sensor. 1 Remove the sensor unit cover. 2 Press M N on the sensor unit. 3 Open and close the window or door several times. R Make sure that the LED indicator lights in green when you close the window or door. 4 Press M N again. Note: R If the LED indicator lights in red when the window or door is closed, the window/door sensor is not installed properly. Re-evaluate the position of the sensor unit and magnet unit (page 10). Features available when using the [Home Network] app Some of the window/door sensor's features that are available when using the [Home Network] app are listed below. For more information, refer to the User's Guide (page 16). - Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the sensor, and view a log of previous events. - Sensor integration You can configure the window/door sensor to trigger other system events, such as camera recording, turning on an electric device (such as a lamp), etc. (Appropriate device required.) - Telephone alert You can configure the system to call a preprogrammed phone number when the window/door sensor is triggered. Accessing the User's Guide The User's Guide is a collection of online documentation that helps you get the most out of the [Home Network] app. 1 iPhone/iPad Tap in the app's home screen. Android™ devices Tap or press your mobile device's menu button in the app's home screen. 2 Tap [User's Guide]. Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. R Android 4.1 or later versions are recommended. R You can also access the User's Guide at the web page listed below. www.panasonic.net/pcc/support/tel/ homenetwork/manual/ 16 For assistance, visit www.panasonic.ca/english/support HNS101C_(en_en)_0117_ver.201.pdf 16 2017/01/19 20:21:05