Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 12
Installation, Installing the Battery in the Handset, Battery Charge, Battery strength
UPC - 037988473649
View all Panasonic KX-TG5110M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Installing the Battery in the Handset Insert the battery ( 1 ), and press it down until it snaps into the compartment ( 2 ). Close the cover. 2 1 To replace the battery: Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 13). Close the cover and charge the handset for about 6 hours. Battery Charge Place the handsets on the base unit and the charger and charge for about 6 hours before initial use. • The unit beeps once, the CHARGE indicator lights and "Charging" is displayed. • When the battery is fully charged, "Charge completed" is displayed if there are no new calls in the Caller List. AND CHARGE Indicator (KX-TG5110M only) Battery strength You can check the battery strength on the handset display. The battery strength is as shown in the chart on the right. 12 Display prompt Battery strength Fully charged Medium Low (flashing) Needs to be recharged. Discharged