Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 71

Useful Information M Troubleshooting If the display shows error messages, see "If the Following Appear on Your Display..." (p. 68-70) for the Cause & Remedy. Telephone System Problem Cause & Remedy Static, sound cuts in/out, fades. Interference from other electrical units. • Move the handset and the base unit away from other electrical appliances (p. 6). • Walk closer to the base unit. • Raise the base unit antennas. • Press [ ] on the handset to turn on the Reception Booster feature (p. 25). The base unit and/or handset does not ring. • The ringer volume is OFF. Set to HIGH, MEDIUM or LOW (p. 19). • If more than one other unit is in use, the handset/base unit may not ring. Users will hear incoming call tones (p. 49). The handset display is blank. • If only the handset display is blank, charge the battery fully (p. 12). You cannot program function items. • Programming is not possible while the unit is being used. • Do not pause for over 60 seconds while programming. • Walk closer to the base unit. • While another user is listening to messages or the Answering System is responding to a call, you cannot program. Try again later. • If more than three other units are in use, you may not be able to program with the base unit or handset. Try again later. While programming or searching, the unit starts to ring and stops the program/ search. • A call is coming in. To answer the call, press [DIGITAL SP-PHONE], [ ] or [ ]. Start again from the beginning after hanging up. You cannot make an intercom/ external call. • If more than one other unit is in use, you may not be able to make a call. Try again later. • Your handset is in the remote operation mode (p. 54). Exit the mode by pressing [OFF]. • The handset you called is too far from the base unit. For assistance, please call: 1-800-211-PANA(7262) 71