Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 72
Problem, Cause & Remedy, IN USE - troubleshooting
UPC - 037988473649
View all Panasonic KX-TG5110M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Troubleshooting Problem The unit does not display the caller's name and/or phone number. The display exits the Caller List or phone book. You cannot redial. " IN USE " is not displayed properly. Cause & Remedy • You need to subscribe to a Caller ID service. • Other telephone equipment may be interfering with your phone. Disconnect it and try again. • Other electrical appliances connected to the same outlet may be interfering with the Caller ID information. • Telephone line noise may be affecting the Caller ID information. • The caller requested not to send his/her information. See page 29. • If a call is being transferred to you, the Caller ID information will not be displayed. • If a (separate) Caller ID box is connected between the unit and the telephone wall jack, disconnect the Caller ID box or plug the unit directly into the wall jack. • Do not pause for over 60 seconds while searching. • If the last number dialed was more than 32 digits long, the number will not be redialed correctly. • The button functions as either redial or pause. It will redial the last number dialed if pressed at the outset of a call (p. 25, 27). If another number has been dialed first, it will operate as a pause button (p. 48). • The line mode selection is incorrect. Set line mode to "A" (p. 18). 72