Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 67

Canceling Registration/Re-registration Re-registering the Handset Handset & Base Unit If you want to re-register the handset to the base unit or a different base unit of the same model, you need to register it to that base unit. The handset will be given a new extension number of that base unit. Only one handset can be registered at a time near the base unit. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute. If you have canceled handset registration at a previous base unit (p. 66), start from step 5. M 1 Handset: Press [CONF/FUNCTION]. 2 Handset: Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ]. 3 Handset: Scroll to "Registration" by pressing [ ] or [ ], then press [ ]. 4 Handset: Press [ ] at "HS registration". M M Initial setting Registration HS registration 5 Base unit: Press [MUTE]. • The MUTE indicator flashes. 6 Handset: (1) Press the soft key ( OK ). (2) Wait until a long beep sounds and the display shows the number. • Registration is complete. Press MUTE on base unit, then OK on handset to register handset Ex. Extension number 2 [2] Handset [2] Registered • You can stop registration by pressing [OFF] on the handset and pressing [MUTE] on the base unit. If you have not canceled the handset registration at the previous base unit (p. 66), the handset number still remains on that base unit memory. To erase the handset number from the previous base unit, see the base unit Operating Instructions. For KX-TG5100M or KX-TG5110M base unit: (1) Press [FUNCTION/EDIT], (2) Press [MUTE], (3) Enter "335#", and (4) Enter that handset number (1 to 8). Useful Information For assistance, please call: 1-800-211-PANA(7262) 67