Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 27

Telephone System Making Calls To adjust the speaker volume (8 levels) while talking To increase, press [ ]. To decrease, press [ ]. Ex. Level 8 Loud Low High • The number of steps indicates the volume level. • If you try to increase/decrease volume when it is at the maximum/minimum levels, 3 beeps will sound. To dial after confirming the entered number 1. Enter a phone number. 3334444 • If you misdial, press [ERASE]. Dial the correct phone number. • To cancel, press [STOP]. 2. Press [DIGITAL SP-PHONE]. 3. When the other party answers, talk into the MIC (microphone). 4. To hang up, press [DIGITAL SP- PHONE]. To redial the last number dialed Press [DIGITAL SP-PHONE], then press [PAUSE/REDIAL]. To redial using the redial list (Memory Redial) The last 5 phone numbers dialed with the base unit are stored in the redial list. 1. Press [PAUSE/REDIAL]. • The last number dialed is displayed with number 1. 2. Scroll to the desired number by pressing [ ] or [ ]. • You can also scroll down through the list by pressing [PAUSE/REDIAL]. • To exit the list, press [STOP]. 3. Press [DIGITAL SP-PHONE]. • To erase an item, scroll to the item then press [ERASE]. • If "No items stored" is displayed, the list is empty. To put a call on hold Press [HOLD] while talking. • "Hold" is displayed and the DIGITAL SP-PHONE indicator flashes. To release the hold, press [DIGITAL SP-PHONE]. • Handset users can release the hold by pressing [ ] or [ ]. • If another phone is connected on the same line (p. 11), you can also release the hold by lifting its handset. • If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold the call will be disconnected. For assistance, please call: 1-800-211-PANA(7262) 27