Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 48

Special Features Using the PAUSE Button (For PBX Line/Long Distance Calls) Handset Base Unit We recommend you press [PAUSE/REDIAL] if a pause is required for dialing with a PBX or to make a long distance call. Ex. Line access number [9] (PBX) [9] [PAUSE/REDIAL] Phone number • Pressing [PAUSE/REDIAL] once creates a 3.5 second pause. This prevents misdialing when you redial or dial a stored number. • Pressing [PAUSE/REDIAL] more than once increases the length of the pause between numbers. FLASH Button Handset Base Unit Pressing [FLASH/CALL WAIT] also allows you to use special features of your host PBX such as transferring an extension call or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the mute (p. 47). Selecting the flash time (use either Base Unit or Handset ) The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". • If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not work correctly. Consult your PBX supplier for the correct settings. Base Unit 1 Press [FUNCTION/EDIT]. 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ]. Initial setting 3 Scroll to "Set tel line" by pressing [ ] or [ ], then press [ ]. Set tel line 4 Scroll to "Set flash time" by pressing [ ] or [ ], then press [ ]. Set flash time 5 Select the flash time by pressing [ ] or [ ]. Set flash time :700ms M M M M 6 Press [ ] (Save), then press [STOP]. Handset : Press [CONF/FUNCTION], and follow steps 2 to 5 above, using the handset. Press the soft key ( SAVE ), then press [OFF]. 48