Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 46
Room Monitor Feature
UPC - 037988473649
View all Panasonic KX-TG5110M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Room Monitor Feature To monitor with Handset The destination unit must not be in use. 1 Press [HOLD] (INTERCOM), then press the soft key ( MONITOR ). 2 To call the base unit, press [0]. To call another handset, press its extension number ([1] to [8]). • To monitor from the speaker, press [ ].You can place the handset on the charger but you cannot place it on the base unit to continue monitoring. Placing the handset on the base unit will disconnect room monitoring. To switch back to the receiver, press [ ]. Press extension# for room monitor Room monitor 00-00-05 01 3 To end monitoring, press [OFF]. • The monitored user can stop being monitored by: - on the handset, press [OFF] or place the handset on the base unit. - on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or [DIGITAL SP-PHONE]. • "Room monitor" is also displayed on the monitored unit. • While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/ TRANSFER indicator flashes and the DIGITAL SP-PHONE indicator lights. To monitor with Base Unit The destination handset must not be in use. 1 Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE]. Press extension# to call MUTE=Monitor 2 To call the handset, press the extension number ([1] to [8]). Press extension# for room monitor Room monitor 00-00-05 01 3 To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or [DIGITAL SP-PHONE]. 46