Panasonic KX-TG6700B Telephone - Page 39
FLASH, Feature, Feature code, Setting code, tone 1 to 4. If you select a melody
UPC - 037988476435
View all Panasonic KX-TG6700B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Programming Feature Set flash time*1*7 Set line mode*1*8 Line1 Line2 Line1 Feature code {0}{5}{2}{1} {0}{5}{2}{2} {0}{5}{3}{1} Setting code {1}: {2}: 600ms {3}: 400ms {4}: 300ms {5}: 250ms {6}: 110ms {7}: 100ms {8}: 90ms {1}: A {2}: Line2 {0}{5}{3}{2} Voice enhancer {5} {1}: On {0}: Page - - 26 *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset. *2 If you set the line selection mode from "Auto" to "Line1" or "Line2" (page 20), the auto talk feature will function for that line only. If the other line receives a call, the auto talk feature does not function. *3 If you subscribe to Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *4 This tone lets you know when you receive a call while you are on the other line, on an intercom call, or monitoring a room. If you select "On", the tone sounds repeatedly for as long as the line rings. If you select "2", the tone only sounds 2 times. *5 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *6 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 4). If you select a melody, you cannot distinguish lines by their ringers. *7 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at "700ms" unless pressing {FLASH} fails to pick up the call waiting call. *8 Generally, the line mode setting should not be adjusted. If k or l is not displayed on the handset or the LINE1 or LINE2 indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to "A". For assistance, please visit http://www.panasonic.com/phonehelp 39