Panasonic KX-TG8231B Digital Cordless Answering System - Page 41

Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Error!! Failed Incomplete Memory full Messages full No items stored No link to base. Move closer to base, try again. Please lift up and try again. You must first subscribe to Caller ID. Cause/solution L The called handset is in use. L The handset you are calling is too far from the base unit. L There is no handset registered to the base unit matching the extension number you entered. L Other units are in use and the system is busy. Try again later. L Recording was too short. Try again. L Phonebook copy failed. Confirm the other handset (the receiver) is in standby mode and try again. L The receiver's phonebook memory is full. Erase the unnecessary phonebook entries from the other handset (the receiver) and try again. L The handset's phonebook memory is full. Erase unnecessary entries (page 20). L Message memory becomes full. Erase unnecessary messages (page 31). L Your phonebook, caller list or redial list is empty. L The handset has lost communication with the base unit. Move closer to the base unit and try again. L Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset's registration may have been canceled. Re-register the handset (page 38). L A handset button was pressed while the handset was on the base unit or charger. Lift the handset and press the button again. L You must subscribe to Caller ID service. Once you receive caller information after subscribing to Caller ID service, this message will not be displayed. For assistance, please visit http://www.panasonic.com/help 41