Panasonic KX-TGP500B04 Administration Guide - Page 145
Provisioning Settings
View all Panasonic KX-TGP500B04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
4.3.5 Provisioning Settings FIRM_FILE_PATH Value Format Description Value Range Default Value Web User Interface Reference String Specifies the URL where the firmware file is stored. Note • • This setting is available only when "FIRM_UPGRADE_ENABLE" is set to "Y". Changing this setting may require restarting the unit. Max. 255 characters Note • The format must be RFC 1738 compliant, as follows: "://:@:/". - "" must be less than 64 characters. - "" must be less than 64 characters. - ":@" may be empty. - The total of "://" and ":/" must be less than 128 characters. - ":" can be omitted if you do not need to specify the port number. If "{mac}" is included in this URL, it will be replaced with the unit's MAC address in lower-case. If "{MAC}" is included in this URL, it will be replaced with the unit's MAC address in upper-case. If "{MODEL}" is included in this URL, it will be replaced with the unit's model name. If "{fwver}" is included in this URL, it will be replaced with either "FIRM_VER_EUDECT" or "FIRM_VER_USDECT" depending on the system. Note that this rule differs from other parameters such as "SIP_USER_AGENT". Empty string Firmware File URL (Page 122) 4.3.5 Provisioning Settings OPTION66_ENABLE Value Format Description Boolean Specifies whether to enable the unit to look for option 66 to receive the TFTP server address or FQDN from the DHCP server. Note • The unit will try to download configuration files through the TFTP server, the IP address or FQDN of which is specified in the option number 66 field. Document Version 2010-08 Administrator Guide 145