Panasonic KX-TGP500B04 Administration Guide - Page 67
Ethernet Port Settings
View all Panasonic KX-TGP500B04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3.4.2 Ethernet Port Settings DNS2 Description Value Range Default Value Phone User Interface Reference Configuration File Reference Specifies the IP address of the secondary DNS server. Note • This setting is available only when [Connection Mode] is set to [Static]. Max. 15 characters ("n.n.n.n" [n=0-255], except "0.0.0.0", "255.255.255.255", "127.0.0.1", etc.) Not stored. Configuring Settings from the Base Unit (KX-TGP550 only)/Handset (Page 17) USER_DNS2_ADDR (Page 155) 3.4.2 Ethernet Port Settings This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings. Note • • When you change the settings on this screen and click [Save], after the message "Complete" has been displayed, the base unit will restart automatically with the new settings applied. If a unit is on a call when "Complete" has been displayed, the base unit will restart after the unit returns to idle. Incorrect settings may cause a network failure. In such a case, you cannot access the Web user interface anymore. To access it again, you need to correct the speed/duplex settings (® see 2.1.2 Speed/Duplex Settings) or perform IP Reset (® see 2.1.4 IP Reset) through phone user interface programming. 3.4.2.1 Link Speed/Duplex Mode LAN Port Description Selects the connection mode (link speed and duplex mode) of the LAN port. Document Version 2010-08 Administrator Guide 67