Panasonic KXFLB756 KXFLB756 User Guide - Page 48
COPY, COPYING, Making a copy
UPC - 037988809622
View all Panasonic KXFLB756 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Copying Making a copy! The unit can make single or multiple copies (up to 99). 1 Using the auto document feeder G Confirm that there are no documents on the scanner glass. 1. Adjust the width of the document guides to the size of the document. 2. Insert the document (up to 15 pages) FACE DOWN into the feeder until the unit grasps the document and a single beep is heard. Document guides FACEDOWN Display: !!!STANDARD STOP COPY START Using the scanner glass G Confirm that there are no documents in the auto document feeder. 1. Open the document cover. RESOLUTION Document cover 2. Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the "TOP" mark on the unit. 3. Close the document cover. G If the original is a thick book, do not close the document cover. G If necessary, press u repeatedly to select the desired setting (see below). G Make sure the handset is on the cradle. Scanner glass STOP RESOLUTION TOP COPY START 2 Press d. 100% FINE [01] COPY:PRESS START G If necessary, enter the number of copies (up to 99). 3 Press d. G The unit will start copying. Note: G Do not open the document cover when making a copy with the auto document feeder. G Any transmittable document can be copied (p. 33). G To make a clear copy from transparencies, be sure to use the scanner glass. Place a blank sheet of paper on top of the transparency, and leave the document cover open during copying. To select the resolution Select the desired resolution according to the type of document. - FINE: For printed or typewritten originals with small printing. - SUPER FINE: For originals with very small printing. - PHOTO: For originals containing photographs, shaded drawings, etc. G If you select "STANDARD", copying will be done using "FINE" mode. G You can also select the resolution after pressing d in step 2. Press u repeatedly to select the desired setting. To stop copying Press {. 48