Panasonic KXFLB756 KXFLB756 User Guide - Page 63

Features Summary Advanced features! How to set menu options 1. Press p. 2. Press ( or ) until the following is displayed: ADVANCED MODE PRESS SET then press w and press ( or ) until the desired feature is displayed. Programming table 3. Press + or - until the desired setting is displayed. 4. Press w. 5. Press p. Note: G Step 3 may be slightly different depending on the feature. G See page 60 for more details. Code Feature & Display Settings Setting the journal report to print automatically ON #22 AUTO JOURNAL MODE=ON [±] OFF Sending document overseas OVERSEAS MODE MODE=ERROR [±] NEXT FAX If you have difficulty sending an overseas fax, activate this feature #23 before starting transmission. This ERROR feature makes sending documents easier by reducing the transmission speed. OFF How the unit operates "ON": The unit will print a journal report automatically after every 30 new fax communications (p. 32). "NEXT FAX": This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting. "ERROR": When the previous fax transmission fails and you redial the same number. G This feature is not available for broadcast transmission. G The calling charge may be higher. Sending a fax at a specific time DELAYED SEND MODE=OFF [±] This feature allows you to take advantage of low-cost calling hours offered by your telephone #25 company. G The setting can be reserved to take place up to 24 hours in advance. ON / fax no. / hh:mm OFF To send a document: 1. Insert the document into the auto document feeder. 2. Follow steps 1 and 2 above. 3. Press + or - to select "ON". 4. Press w. 5. Enter the fax number. 6. Press w. 7. Enter the transmission start time. Press * to select "AM" or "PM". 8. Press w. 9. Press p. G To cancel after programming, press { then w. (The default setting is in bold type.) 63