Panasonic KXFLB756 KXFLB756 User Guide - Page 66

Error Messages Reports! If your unit cannot send a fax, check the following: - Is the number you dialed correct? - Does the other party have a fax machine? If the problem remains, correct it by following the communication message printed on the sending and journal reports (p. 32). COMMUNICATION ERROR (CODE: 40-42, 46-72, FF) G A transmission or reception error occurred. Try again or check with the other party. NO DOCUMENT G The document was not fed into the unit properly. Reinsert the document and try again. COMMUNICATION ERROR (CODE: 43, 44) G A line problem occurred. Connect the telephone line cord to a different jack and try again. G An overseas transmission error occurred. Try using the overseas mode of feature #23 (p. 63). DOCUMENT JAMMED G The document is jammed. Remove the jammed document (p. 77). ERROR-NOT YOUR UNIT (CODE: 54, 59, 70) G A transmission or reception error occurred because of a problem with the other party's fax machine. Check with the other party. OTHER FAX NOT RESPONDING G The other party's fax machine is busy or has run out of recording paper. Try again. G The document was not fed properly. Reinsert the document and try again. G The other party's fax machine rings too many times. Send the fax manually (p. 31, 32). G The other party's machine is not a facsimile. Check with the other party. G The number you dialed is not in service. PRESSED THE STOP KEY G { was pressed and fax communication was canceled. THE COVER WAS OPENED G The printer cover was opened. Close it and try again. MEMORY FULL G The document was not received due to the memory being full. OK G Fax communication was successful. 66 For fax advantage assistance, call 1-800-435-7329.