Panasonic KY-R647 Operating and Installation Instructions - Page 19
Cleaning and Maintenance
![]() |
View all Panasonic KY-R647 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Cleaning and Maintenance English What ■■Everyday dirt on the Glass Panel (fingerprints, marks, stains left by food or non-sugary spillovers on the glass) How 1. Switch OFF the power. 2. Apply a neutral detergent while the glass is cool down. 3. Rinse and wipe dry with a clean cloth or paper towel. ■■Boil-overs, melted and hot sugary spills on the Glass Panel. Remove these immediately with a palette knife or a razor blade scraper that is suitable for the Glass Panel, but beware of the hot cooking zone surface: 1. Switch OFF the power. 2. Hold the blade or utensil at a 30° angle and scrape the dirt or the spill to a cool area of the Induction Hob. 3. Follow steps 2 to 3 for 'Everyday dirt on the Glass Panel'. ■■Spillovers on the touch controls. 1. Switch OFF the power. 2. Absorb the spill with paper or dry cloth. 3. Wipe the touch control area with a clean damp sponge or cloth. 4. Wipe the area until it is completely dry with a paper towel. Important! • When the power is switched off and there are no hot surfaces, indication will disappear but extreme care should be taken as the cooking zone may still be hot. • Hard scourers, some nylon scourers and harsh abrasive cleaning agents may scratch the Glass Panel. Make sure the cleaner or the scourer is suitable. • Never leave residues left from cleaning on the Induction Hob: the Glass Panel may be permanently stained. • Remove stains left by melted and sugary food or spillovers as soon as possible. If left to cool on the Glass Panel, they may be difficult to remove or even permanently damage the glass surface. • Cut hazard: when the safety cover is removed, the blade of a scraper is razor-sharp. Handle with extreme care and always store it safely, out of children's reach. • Take extreme care when handling utensils with a blade, the Glass Panel may scratch. • The Induction Hob may beep and turn itself off, and the touch controls may not function when there is liquid on it. • Make sure you dry the touch control area before turning ON the Induction Hob again. EN-17
![](/manual_guide/products/panasonic-kyr647el-operating-installation-instructions-3a65351/19.png)