Panasonic KY-R647 Operating and Installation Instructions - Page 4
Warning, Caution
View all Panasonic KY-R647 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safety Precautions Make sure to follow these instructions In order to prevent accidents or injuries to the users, other people, and damage to property, please follow the instructions below. ■■The following charts indicate the degree of damage caused by wrong operation. WARNING Indicate serious injury or death. CAUTION Indicate risk of injury or property damage. ■■The symbols are classified and explained as follows. These symbols indicate prohibition. This symbol indicates requirement that must be followed. EN-2 WARNING Stop using the unit when abnormality / failure occurs and turn 'OFF' the power switch or pull out the 3 pin plug. Example of abnormality / failure: ••Abnormal noise or heat. ••Abnormal emission of smoke, fire. ••Fire or oil ignition. The unit must be grounded. Plug the power cord to socket outlet with grounding continuity terminal. Improper grounding could cause electric shock. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. This appliance is necessary to allow disconnection from the supply after installation. The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules. This appliance is not intended to be operated by means of an external timer or a separate remote-control system. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Be sure to disconnect the Power Plug from the wall outlet or switch OFF the external switch before maintenance, repair or service. Also, do not handle the Power Plug or external switch with wet hand. When disconnecting the Power Plug, hold the plug itself. Do not pull the cord in anyway. The cord may be damaged and may cause fire or electric shock. Insert the Power Plug firmly, otherwise it may cause fire or electric shock. Clean the Power Plug regularly, otherwise, it may cause insufficient insulation due to moisture, and may cause fire.