Panasonic KY-R647 Operating and Installation Instructions - Page 30
Installation Instructions, Electrical Connection
View all Panasonic KY-R647 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation Instructions For Installer Electrical Connection WARNING This hob must be connected to the main power supply by a suitably qualified person. Before connecting the hob to the mains power supply, check that: ••The domestic wiring system is suitable for the power drawn by the hob. ••The voltage corresponds to the value given in the Name Plate. ••The power supply cable sections can withstand the load specified on the Name Plate. To connect the hob to the main power supply, do not use adapters, reducers, or branching devices, as they can cause overheating and fire. The power supply cable must not touch any hot parts and must be positioned so that its temperature will not exceed 75 ˚C (167 °F) at any point. Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations must only be made by a qualified electrician. ••If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated tools to avoid any accidents. ••If the appliance is being connected directly to an isolating switch, it must be installed with a minimum opening of 3 mm (7/64 in.) between contacts. ••The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. ••The cable must not be bent or compressed. ••The cable must be checked regularly and replaced by authorized technicians only. L2 L1 Red Black Yellow / Green EN-28