Panasonic NN-CD87KS Operating Manual - Page 28

Operation (continued) Setting a Standing Time 1 3 Press Timer/Clock once. 4 Some recipes call for a standing time after cooking. Press Microwave until the desired power level appears in the display. 1000 W is the highest and 100 W is the lowest. 2 ヵㄊㄎㄆ Set desired standing time by turning dial (up to 1 hour and 30 minutes). 5 Press dial to Start. Cooking will start. After cooking, standing time will count down without oven operating. NOTES: 1. If the oven door is opened during Kitchen Timer, Standing Time, Delay Start, the time in the display window will continue to count down. 2. Standing Time and Delay Start can not be programmed together with auto programs (such as Defrost, Sensor Reheat, Auto/Sensor Cook and Steam Clean) and preheating. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results. 3. When using Standing Time or Delay Start, it is up to 2 power stages. 4. If the time exceeds one hour, it will count down in units of minutes. If less than one hour, the time will count down in units of seconds. 5. An "H" will appear in the display to denote hours. ヵㄊㄎㄆ Set cooking time by turning dial (see previous page for maximum times). 28 '$%"1@&/@JOEE