Panasonic NN-SE284 Installation Instructions - Page 2

Exhaust Requirements, Tool Requirements

Page 2 highlights

4. EXHAUST REQUIREMENTS This product is shipped for use in the top exhaust ventilation mode. If you wish to install this product without using an exhaust duct, the exhaust must be recirculated through the front grille and the charcoal filter. This product is shipped with a standard charcoal filter already installed. The Charcoal Filter cannot be cleaned and should be replaced periodically every 6 to 12 months, or more often if necessary. When necessary to replace the charcoal filter, it can be purchased from your local Panasonic dealer. The part number of the replacement charcoal filter is NN-CF203, refer to the following instructions for replacement. 5. TOOL REQUIREMENTS Adhesive Tape Tape Measure Phillips Screwdriver Electric or Hand Drill Electric or Hand Jigsaw Metal File Side Cutter or Tin Snipper Marking Pen 2 IP3297_F03138Q03CP_Eng_00_101028.indd 2 2010-10-28 11:51:29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

2
4. EXHAUST REQUIREMENTS
This product is shipped for use in the top exhaust ventilation mode.
If you wish to install this product without using an exhaust duct, the exhaust must be recirculated through
the front grille and the charcoal
lter. This product is shipped with a standard charcoal
lter already installed.
The Charcoal Filter cannot be cleaned and should be replaced periodically every 6 to 12 months, or more
often if necessary.
When necessary to replace the charcoal
lter, it can be purchased from your local Panasonic dealer.
The part number of the replacement charcoal
lter is NN-CF203, refer to the following instructions for
replacement.
5. TOOL REQUIREMENTS
Adhesive Tape
Tape Measure
Phillips Screwdriver
Electric or Hand Drill
Electric or Hand Jigsaw
Side Cutter or Tin Snipper
Metal File
Marking Pen
IP3297_F03138Q03CP_Eng_00_101028.indd 2
IP3297_F03138Q03CP_Eng_00_101028.indd
2
2010-10-28 11:51:29
2010-10-28
11:51:29