Panasonic PT AE700U Lcd Projector - Page 14
TURNING OFF THE POWER, Press the MAIN POWER switch to turn off - doesn t power on
UPC - 410000150467
View all Panasonic PT AE700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Turning off the power ˛# ˛% ˛$ Power indicator #Press the POWER button. B"POWER OFF" is displayed on the screen. POWER OFF OK CANCEL $Press the I or H button to select "OK", and then press the ENTER button. BThe lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange while the cooling fan is still operating.) % Press the MAIN POWER switch to turn off the power after the power indicator on the projector illuminates red. BDo not cut power to the projector in any way while the cooling fan is still operating. Be careful not to switch off the MAIN POWER switch of the projector or unplug the power cord from the wall outlet. 26-ENGLISH NOTE: B During projection of an image, the cooling fan will operate, emitting a small noise as it operates. Turning the lamp on or off will cause this noise to increase a little. B By using the "OPTION" menu to set "LAMP POWER" to "LOW", the operating sound of the fan can be reduced. (Refer to page 47.) B You can also turn off the power by pressing the POWER button twice or by holding it down for at least 0.5 seconds. B When the projector is in standby mode (the power indicator on the projector is illuminated red), the projector continues to draw approximately 3.0 W of power even when the cooling fan has stopped. Power indicator Power indicator status Projector status Red Illuminated The projector is in standby mode and image projection is possible by pressing the POWER button. The projector is preparing for projection after the Green Flashing power is turned on while the power indicator is illuminated red. (After a short period, a picture will be projected.) Illuminated A picture is being projected. Illuminated The lamp is cooling down after the power is turned off. (The cooling fan is operating.) Orange Flashing The projector is preparing for projection after the power is turned on while the power indicator is illuminated orange. (After a short period, a picture will be projected.) ENGLISH-27 Basic operation